• VT M2M M4 4
  • VT M2M M4 5
  • VT M2M M4 6

VT-M2M-M4

Vantron VT-M2M-M4 is an extremely low-power, low-cost, configurable, and programmable gateway specifically designed for Machine-to-Machine (M2M) communication and Internet of Things (IoT) applications.

Based on an industrial MCU processor, this device provides various wireless supports including 2G/GPRS/3G/4G/LTE cellular, WLAN, GPS, Zigbee, Lora, Bluetooth, and Iridium (9603). This device supports interface I/Os including one Ethernet, RS-232/485, USB, and GPIOs. In addition, it also supports internal battery operation and can be powered by a solar panel.

This device has the IP65 protection (Optional IP67) and a wide-range power supply input (4-36V) and runs Linux. The Software Development Kit (SDK) is available.

System

ProcessorARM 32-bit Cortex-M4, 168MHz
RAMOn Chip 256KB SRAM
FlashOn Chip 1024KB Flash
StorageExtended 2MB (up to 8MB) SPI Flash, for saving data

Wireless Communication

Cellularmini-PCIe 4G/GPRS module, in USB or UART interface, Flexible for the selection of kinds module by customer.
WLANOptional Embedded 80.211 b/g/n WLAN Module
ZigBee/LoRaOptional, or RF 2.4G
GPSuBlox: NEO-6M, Support GPS (Optional BeiDou)
Satellite (Optional)Optional support Iridium Satellite Modem based on NAL: 9603-I or others (Actived by customer)
AntennaInternal antennas, Support external antenna by different cable & enclosure

I/O

EthernetOptional pin out 1x10/100Base-T by M12 connector
USBOptional, 1xUSB Host, Pin out to M12
AccelerometerFreeScale:MMA8451
Temp SensorTI:TMP112, +/- 0.5°C
RTCSupported
LEDStatus LED (Charging / Alive / Report / Status)
COM Port1xRS232,Audio jack , for Local Configure Optional, 1xRS232, isolated, 8x1.25mm, pin out to M12. Optional, 1xSDI-12, 8x1.25mm, pin out to M12. Optional, 1xRS485, isolated, 8x1.25mm, pin out to M12.
GPIOs (Optional)1xGPIO IN (with transient protection), Option 4xGPIO IN 1xRelay Output, Drive >8A/220VAC, optional 3x Relay
Analogs (Optional)1 or 2xAnalog Input, 12bit, support 4-20mA or 0-5V Input, High input impedance, with Transient protection

Software

OSReal-Time OS
ApplicationsProvide SDK and transparent communication. Support Over the air update. Power management of DC and battery monitor. Optional: Support at least 1 Geofence, Radial can be set, Position report once a day or report on motion, and store 30 days of position reports.

Power

DC InputDC 5V/12V/24V (4-36V) Support Kinds of Solar Pad
BatteryInternal Battery, Manually Changeable, with IP67 Cover, 3.7V, 6Ah Battery Supported.
ConsumptionUltra-low consumption, 2W pulse, 100uA Idle Without Solar Input can work 1 week, once report a day.

Mechanical

Dimensions160(L) x 118(W) x 53(H)
WeightTBD – As Light As Possible
EnclosureBlack Plastic Box, IP67 Optional Spec (J1455 (Cab/Chassis Mount), Chemical Resistance, UV Resistant, Gravel Bombardment)
MountingOptional DIN method, or Magnetic mount method, or with Mounting Bolts / Zip Tie

Environment Condition

TemperatureOperating::-40°C~+85°C (Lower temperature battery may reduce the capacitance) Storage: -20°C ~ +70°C, (ETR:-40°C ~ +85°C Optional)
Humidity5-95%RH at 25-35 (Non-Condensation)
Cooling ModeFan less
ApprovalsUL, FCC Class A, and CE, RoHS Compliance

Contact us to get more information.